2g 3g GPS vehicle tracker installation guide-How to prevent GPS locator defused by thieves

vehicle GPS locator has been used very widely at present, it is also very common, in the automotive industry, it is an indispensable security positioning device, the vehicle management, vehicle anti-theft plays an important role. vehicle GPS locator in some industries are very advanced risk control equipment, but in specific industry, have no secrets, demolition is inevitable, so how to prevent the GPS locator demolition is specific industry practitioners have to consider the problem.

So how to prevent the GPS locator was torn down? Prevent the GPS locator was demolished and what are the effective way?

1, can choose the type of GPS locator, when equipment man-made destruction, increase removal difficult.

2, choose a standby power GPS locator, when external power supply was damaged, can still be short-term orientation, and to send out alarm information.

3, install hidden as far as possible. Install the device in the car is not easy to be found.

4, available trajectory playback, dismantled and find the activity rule of people or vehicles.

5, in conditions allow, can install two GPS locator, a thief in the demolition of a bridge abutment, tend not to go looking for another.

GPS locator is built in GPS module and a mobile communication terminal module, GPS module is used to obtain the location data from mobile communication module (GSM/GPRS network) to a server on the Internet, which can realize the query on the computer terminal location.

Installation method

External power supply GPS device must be connected to car power supply, can work for 24 hours, usually criminals want to use this product tracking vehicles, others will not be possible. Because of must with car power supply access, the difference between general external locator. Therefore does not recommend using external power supply.

The installation way

1, if you understand, oneself can also, in fact as long as find car power the positive and negative, negative, very good search, body take place is the cathode, anode find inside the fuse box, a car key switch near to find or directly to the battery;

2, the best is often electricity, is not affected by auto key switch, from the car battery directly led to the power cord;

3, pay attention to the GPS locator with a light side to toward the sky, toward the side of the sky don't close to metal blocking the internal GPS antenna, it will receive the satellite signal from the twenty thousand km;

4, also can please related technical personnel, a charge according to the local specific situation!

Installation position

1. The windscreen above the roof lamp;

2. Below the windscreen decorative shelter;

3. Before the dashboard shadows around;

4. The door clapboard;

5. Below the windshield decorating plate after;

6. The front bumper, note waterproof;

7. Wiper plate, note waterproof.

Note: if the windshield paste with metal heat insulation layer or heat, will reduce the GPS signals, caused by GPS work properly. Note to replace equipment installation location at this time.

Install the point

1. In order to avoid the thief damage, equipment one should be hidden as far as possible;

2. Avoid put together with the source, such as wireless reversing radar, alarm, and other automotive communications equipment;

3. You can use the cable tie is fixed, or with wide sponge strong double-sided tape;

4. Equipment with GSM antenna and GPS antenna, when installation should guarantee the positive upward (the sky).

  manufacturer of GPS tracker and radar detector:www.great-will.com
  Professional vehicle gps tracker web:http://www.gpstrackfocus.com