The first step: to find the desired positioning terminal line inventory tool accessories and wiring are complete. Standard type GPS locator only four lines need to take, so first car crossing a line in bold below to find out. GPS locator red line → Cars DC12 / 24v constant electric GPS locator black wire → Cars negative / grounding line vehicle GPS tracker white line → Cars ACC / line keys (switch status detection engine, will take) GPS locator yellow line → automobile oil lines / oil line (which can be accessed do not take)
Step two: install SIM card
After many of my friends do not understand why the GPS positioning system to install a phone card, SIM card actually has an important role in the GPS positioning system, it simply is a GPS locator responsible for the latitude and longitude data collection terminal, latitude and longitude data collected by SIM card GSM network in the form of GPRS to transmit data to the specified locate the background, finally forming a positioning monitoring system.
Note: Make sure that the GPS positioning terminal in the case of non-energized insert the SIM card, the card is responsible for burn easily.
After the SIM is installed, open the standby power switch (on the side), and confirm SIM firm does not come loose.
The third step: Wiring
After the card is installed, return to the first step. Installation of various color line sequence connected, ensure that joints are not loose, no water. Please connect the wiring process with a standard car circuit wiring methods must not perfunctory. Wiring handled properly, on the one hand easy to make a GPS locator off does not work, there are certain short circuit fire safety hazard.
As illustrated, the thread to use heat shrink tubing to protect and ensure easy to fall off, no water. Then with waterproof electrical tape strapping, with the original car lines tied together.
Step four: fixed terminal
GPS locator compact, easily concealed installation. Common position is fixed to the main drive / front passenger front bezel removed, in its interior space, as well as underground seat, trunk, etc. places can also be installed. On the one hand to ensure that the GPS antenna to receive the satellite signal is normal, but also ensure that the vehicle washing when water is not easy to burn and cause the terminal.
Note: 1, GPS antenna (small black squares below the road) signal can easily be shielded concrete and metal material and the plastic body, cloth, and so there is no impact. So fixed, please make sure it does not signal receiving surface side metal shielding material, can ensure that the receiving surface upward toward the sky. By Velcro or plastic tie as fixed flat, so that it will not fall off during prolonged use.
2, GPS positioning is not fixed when the upper and lower reverse points, tie the terminal by Velcro and fixed tight to ensure that in the long vehicle bumps, alternating hot and cold environments such does not fall, do not abnormal sound.
Step Five: After activating all the steps above to complete the line, the vehicle recovery. Then the license plate number, terminal ID, SIM card number and other information reported to the company's customer service personnel to activate, so in computers and cell phones, micro-channel where you can locate the vehicle management. Since GPS locator installation is complete
vehicle tracker Website: www.gpstrackfocus.com
Qualcomm Quick Charger Website: www.okaycharger.com
gps tracker Website: www.great-will.com
Qualcomm Quick Charger Website: www.okaycharger.com
gps tracker Website: www.great-will.com
没有评论:
发表评论